Pfd Bezel Keys - Garmin G600 Pilot's Manual

1.1.12.2

PFD Bezel Keys

Heading (HDG)
Selects Heading Select mode. Pressing the PFD knob in Heading mode will
center the Heading Bug on the current Heading.
This is the default mode for the PFD knob. After 15 seconds of inactivity in
another mode, the PFD knob will revert to Heading mode. If the Heading is
invalid, the PFD knob will revert to Course mode.
Course (CRS)
Selects Course Select mode. Pressing the PFD knob in Course mode will
center the needle for a VOR or OBS mode course.
Altimeter (ALT)
Selects Altitude Select mode. Pressing the PFD knob in Altimeter mode will
enter the current altitude in the Altitude Select window.
Altitude Bug
Figure 1-10 Pressing PFD Knob Sets Altitude Select to Current Altitude
190-00601-02 Rev. B Garmin G600 Pilot's Guide
Altitude Select Window
Current Altitude
Barometric Setting
1-9