Altitude Display - Garmin G1000:Socata Pilot's Manual

Displaying traffic on the Navigation Map
1) Ensure that the TAS system is operating. With the Navigation Map displayed, select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map as shown in the figure.
Traffic
Advisory
Proximity
Traffic
Non-Threat
Traffic
TA Off Scale
Banner
Non-Bearing
Traffic Advisories
The Navigation Map Page Setup Menu also controls the display of traffic. The setup menu controls the map
range settings. Traffic data symbols and labels can be decluttered from the display. If a map range larger than
the map range setting is selected, the data is removed from the map. Maps besides the Traffic Map Page use
settings based on those selected for the Navigation Map Page.

ALTITUDE DISPLAY

Changing the altitude display mode:
1) On the Traffic Page, select the ALT MODE Softkey.
2) Select one of the following Softkeys:
• BELOW
• NORMAL
• ABOVE
• UNREST (unrestricted)
3) To return to the Traffic Page, select the BACK Softkey.
Or :
190-00709-00 Rev. A
Figure 6-86 TAS Traffic on Navigation Map
Garmin G1000 Pilot's Guide for the Socata TBM 850
HAZARD AVOIDANCE
6-79