Replacing The Cover - Trane Wired Temperature Sensors Installation, Operation And Maintenance Manual

Installation and Configuration: Display Sensor
3. Press the left and right arrows for 4 seconds. The lock symbol
Note: If you try to access a feature that is locked, the locked symbol

Replacing the Cover

To replace the cover:
1. Hook the cover over the top of the back plate. Apply light pressure to the bottom of the cover
2. Secure the cover by installing the security screw into the bottom of the cover.
16
to indicate that the setting has been locked.
If you press a keypad button to try change a locked setting, the locked symbol flashes.
until it snaps in place.
will appear on the display
appears on the display.
Security screw
BAS-SVX10C-EN