Replacing The Sensor Cover - Trane WDS Installation, Operation And Maintenance Manual

3. Press the left and right arrows for 4 seconds.
Note: If you try to access a feature that is locked, the locked symbol

Replacing the Sensor Cover

To replace the cover:
1. Hook the cover over the top of the back plate. Apply light pressure to the bottom of
2. Install the security screw into the bottom of the cover (if desired).
BAS-SVX04C-EN • Wireless Sensors
the display.
If you press a keypad button to try change a locked setting, the locked symbol will
flash.
the cover until it snaps in place.
Installation
will appear on
Security screw
27