How To Switch Between Instrument Displays - Furuno NAVNET TZ2 TZTL12F Operator's Manual

12. INSTRUMENT-RELATED DISPLAYS
12.2.3

How to switch between instrument displays

Full screen
There are nine default full-screen displays, Sailing, Cruising, Single, Outboard, Twin
Outboard, Triple Outboard, Quad Outboard, Single Inboard, Highway, and Twin In-
board.
You can show the full-screen instrument
display by these two methods.
• Swipe the screen leftward or rightward.
The name of the currently shown display
appears at the center of the screen.
• Tap the screen to show the instrument
screen selection window, shown right.
Three-way and four-way split screens
Note: The four-way split screens is only
available for the TZT2BB.
The default display screens in the three-
way and four-way split screen are [Naviga-
tion], [Historical Graphs], [Environment Nu-
merical], [Wind], [Numeric], [Highway],
[NAVpilot], [Single Engine], [Twin Engines],
[Triple Engines], and [Tank]. The availability
of a display depends on your system config-
uration.
You can switch between the displays by
swiping downward at the bottom of the dis-
play, or tapping the screen to display the
pop-up menu shown below and tapping the
display of your choice.
12-10