How To Show The Accu-Fish Icon On The Overlay - Furuno NAVNET TZ2 TZTL12F Operator's Manual

3. 3D DISPLAY, OVERLAYS
3.2.6

How to show the ACCU-FISH icon on the overlay

The ACCU-FISH icon can be shown on the chart plotter display. Requires an ACCU-
™
FISH compatible transducer (see Appendix 2) and applicable network sounder (DFF
series, BBDS1).
To show the ACCU-FISH icon on the chart plotter display, open the Layers menu, then
set [ACCU-FISH] to [ON]. Select [OFF] to remove the icon from the chart plotter dis-
play.
Note: Control of the ACCU-FISH icon on the chart plotter display can always be done
through the Layers menu, regardless of the [ACCU-FISH] setting (see section 7.14.3)
on the [Fish Finder] menu.
3-12
ACCU-FISH icons