Instrument Display - Furuno TZTL12F Operator's Manual

Instrument Display

With connection of appropriate sensors, the instrument display shows various navigation data.
How to enable the instrument display How to enable the instrument display
Add an instrument display icon to the home to screen to show the instrument display.
How to switch instrument displays (ex. full display)
Full 1 display Full 1 display
How to edit an instrument display How to edit an instrument display
Long tap
Long tap the instrument
display.
How to remove or change an indication
Tap
Long tap the indication to
change or remove to get into the
edit mode.
How to add an indication
Tap
Long tap an area not circum-
scribed with a blue line to get
into the edit mode.
Tap
Swipe up or down
Edit mode Edit mode Edit mode Edit mode Edit mode
A blue line surrounds each
indication.
Tap a size in desired category
([Graphic], [Numeric], Highway]).
14
Tap
After setting, tap [ ].
(Incorporation in 3-way
screen is also possible.)
Full 2 display Full 2 display
Long tap location not circumscribed with
blue line to save changes.
What you can do in the edit mode What you can do in the edit mode What you can do in the edit mode What you can do in the edit mode What you can do in the edit mode
Remove / change / add / rearrange
indications (drag and drop)
- Remove indication: Tap [Remove].
- Change size: Tap [Small]*, [Medium], or [Large].
- Change type: Tap [Change Type].
- Change indication: Select in [NAVIGATION DATA].
* Graphic, digital only
Added item appears at tapped
location.
Drag