9. FILE OPERATIONS
9.7
How to Import the Equipment Settings
You can load saved settings data from an appropriate media to this unit, and share
them with the NavNet TZtouch2 units in the NavNet network.
1. Put media in port (slot).
2. Open the Home screen, then tap [Settings]→[Files]→[Restore Settings]. A list of
user settings stored on the card in the media appears.
USB 1
3. Tap the file to load. A confirmation message appears.
4. Tap [OK]. The message "IMPORT SUCCEEDED" appears if the importing was
successful.
5. Tap the [OK] button to erase the message.
6. Tap the close button on the title bar to finish.
9.8
My TimeZero Cloud Data Service
With the TimeZero
and tracks) stored in your TimeZero
To use the TimeZero
TimeZero
9.8.1
How to save settings/data to the cloud
Do as follows to save settings/data to the cloud.
1. Open the home screen, then tap [Settings]→[General].
2. Tap [Login] at the SOCIAL NETWORK section and login to your TimeZero
count.
3. Tap "<" on the title bar to return to the [Settings] menu.
4. Tap [Files]→[Backup Settings in the Cloud]. If the file already exists in the cloud,
you are informed that the file exists and are you sure to proceed. Tap [OK] to write
over the existing file.
9.8.2
How to retrieve settings/data from the cloud
Do as follows to retrieve settings/data from the cloud.
1. Open the Home screen, then tap [Settings]→[General].
2. Tap [Login] at the SOCIAL NETWORK section and login to your TimeZero
count.
3. Tap "<" on the title bar to return to the [Settings] menu.
4. Tap [Files]→[Restore Settings From the Cloud]. You are asked if you are sure to
retrieve settings. Tap [OK] to erase the message.
5. Tap [OK] to write over settings data stored in the MFD. If there is no settings data
in the cloud, a message informs you of no data. Tap [OK] to erase the message.
9-6
™
cloud data service, you can share data (settings, points, routes
™
cloud data service, connect to the internet and create a
™
account.
™
cloud account with another NavNet TZtouch2.
™
ac-
™
ac-