How To Follow A Route In The Reverse Direction; How To Stop Following A Route; How To Skip A Point On A Route - Furuno NAVNET TZ2 TZTL12F Operator's Manual

There are two methods to restart navigation:
From the navigation bar
Tap the [Restart] button.
From the pop-up window
1. Tap a route leg, route course or the "shortest distance" line (yellow) to show the
pop-up window.
2. Tap [Restart].
The route start position for the route moves to the current position.
5.11.2

How to follow a route in the reverse direction

You can follow a route in reverse order. This helps you return along the same path.
Note: This function is not available for an active route.
1. Tap the route that you want to transverse in the opposite order to show the pop-
up window.
2. Tap [Reverse].
The arrows on the route legs are in reverse direction and the numbers of the route
points are in reverse order.
5.11.3

How to stop following a route

From the navigation bar
Tap the [STOP] button.
From the pop-up window
1. Tap a route leg, route course or the "shortest distance" line (yellow) to show the
pop-up window.
2. Tap [Stop Nav].
The arrival area, XTE lines, set course (purple line) and yellow line are erased
from the screen. The default color for the route is restored.
Note: You can also stop following a route from the Slide-out menu, with [Stop Nav].
5.11.4

How to skip a point on a route

You can skip a route point to go to the succeeding route point in the route. Open the
Slide-out menu, then tap [Route] and [Skip Next]. The current route point is skipped
then the next route point becomes the destination. The skipped route point is greyed
out.
5. ROUTES
5-17