How To Export (Backup) The Equipment Setting - Furuno NAVNET TZ2 TZTL12F Operator's Manual

How to import PBG recordings
You can import the PBG recordings stored on a media, to the internal memory of this
unit.
Note: Imported PBG recordings cannot be shared among NavNet TZtouch2 units
within the network. You must import a recording to each unit in the network.
1. Put media in port (slot).
2. From the Home screen, tap [Settings]→[Files]→[Import PBG]. A list of PBG re-
cordings stored in the media appears.
3. Tap the PBG recording file(s) to import. You are asked if you are sure to import
the selected PBG recordings.
4. Tap [OK]. The message "IMPORT SUCCEEDED" appears if the exporting was
successful.
5. Tap [OK] to erase the message.
6. Tap the close button on the title bar to finish.
9.6

How to Export (Backup) the Equipment Setting

You can save the settings data to the SD card inserted in SD card unit or the media
inserted in the USB port to use the settings on other NavNet TZtouch2 units.
1. Put formatted media in port (slot).
2. Open the home screen, then tap [Settings]→[Files]→[Backup Settings]. A list of
user settings stored on the card in the media appears.
USB 1
3. Tap the destination for the equipment settings. You are asked if you are sure to
proceed. The message "EXPORT SUCCEEDED" appears if the exporting was
successful.
4. Tap the [OK] button.
5. Tap the close button on the title bar to finish.
9. FILE OPERATIONS
9-5