How To Edit A Display Icon - Furuno NAVNET TZ2 TZTL12F Operator's Manual

Multi function display
Table of Contents

Advertisement

1. SYSTEM INTRODUCTION
1.7.2

How to edit a display icon

Long tap the display icon to edit to show the editing icons on the display icon. Tap the
applicable editing icon. Refer to the figure and instructions below.
Note: The chart plotter screen icon, which initially appears at the top left corner of the
display screen icons, cannot be deleted or edited, but it can be resized. Other display
screen icons can be deleted, edited, resized as desired.
Edit icon content: Tap the icon at the upper left corner. See the illustration in
subsection 1.7.1 for how to set the icon.
Remove icon: Tap the icon at the upper right corner to remove the icon from the home
screen (and quick page if the icon size is selected to "large".
Change icon size: Tap the icon at the lower right corner to switch the size between
large and small. (Icons set for large size appear on the quick page.)
Note: Any changes made on the home screen are reflected on the home screens of
other NavNet TZ touch2 in the same network.
1-18
Long
tap
Edit icon content
Change icon size
Remove icon

Advertisement

Table of Contents
loading

This manual is also suitable for:

Navnet tz2 tztl15fNavnet tz2 tzt2bb

Table of Contents