Furuno NAVNET TZ2 TZTL12F Operator's Manual page 27

1. SYSTEM INTRODUCTION
No. Key Name
10 CURSOR key and cursor
pad
CURSOR key CURSOR key
11 STBY/AUTO key
12 POINTS/ROUTE key
13 Rotary knob
14 RANGE OUT/IN key
15 SHIP/3D key and scrolling
pad
Scrolling Scrolling
SHIP
3D
SHIP/3D SHIP/3D
1-8
CURSOR key, short push:
• Opens pop up menus.
• Activates/confirms the item selected by the cursor.
Cursorpad
CURSOR key, long push:
• Edit display icon (on Home screen).
CursorPad operation:
• Moves the selection cursor.
Switches the steering mode of the FURUNO NAVpilot series
Autopilot between the Stand-by and AUTO modes. When
switching occurs, a beep sounds* and a message informs you
of Navpilot mode change.
• Stand-by mode→AUTO mode: "Navpilot Engaged".
• AUTO mode→Stand-by mode: "Navpilot Disengaged".
Short push: Sets the cursor location as a point.
Long push: Starts a route from the cursor location.
Short push:
• Opens pop up menus.
• Activates/confirms the item selected by the cursor.
Long push:
• Edit display icon (on Home screen).
Rotate:
• Moves the selection cursor. Selected items are highlighted.
• Zooms in/out.
• Zooms in/out.
Ship/3D button short push:
• Returns own ship to center of screen (Chart Plotter/Weath-
er/Radar display).
• Cancels the echo history (Fish finder display).
pad pad Ship/3D button long push:
• Switches between 2D and 3D display.
Scrolling pad:
• Scrolls chart, radar picture, and AXIS make PTZ network
button button
cameras.
Description