Installing and cabling the G650 Media Gateway
Cabling the G650 Media Gateways
After you mounting the G650 Media Gateways in the rack, connect:
TheTDM/LAN cables between them
●
CAT5 cables to the appropriate slots on the back of the media gateways
●
You can mount and cable up to five media gateways in a rack. The media gateway on the
bottom is referred to as media gateway A. The other media gateways are referred to as media
gateways B, C, D, and E, from the bottom to the top media gateway in the rack.
Perform the following tasks to cable the G650 Media Gateway:
Cabling two media gateways
●
Cabling the third media gateway
●
Cabling the fourth media gateway
●
Cabling the fifth media gateway
●
Installing circuit packs in the G650 Media Gateway
●
When you cable the media gateways together, refer to the G650 TDM/LAN Cable Installation
diagram included with the shipment or the diagrams at the end of these procedures:
Figure 13: G650 TDM/LAN cable installation (part 1)
●
Figure 14: G650 TDM/LAN cable installation (part 2)
●
Figure 15: G650 TDM/LAN cable installation (part 3)
●
Figure 16: G650 TDM/LAN cable installation (part 4)
●
Figure 17: G650 TDM/LAN cable installation (part 5)
●
40 Installing the Avaya G650 Media Gateway
on page 41
on page 42
on page 42
on page 43
on page 49
on page 44
on page 45
on page 46
on page 47
on page 48