Avaya G650 Installing page 44

Installing and cabling the G650 Media Gateway
7. In media gateway E, install the upper connector of the TDM/LAN bus cable on the right end
of the TDM/LAN bus in media gateway E.
8. Flip over the routing slot plates and reinstall both plates. Once you reinstall the plates, the
ends of the routing slots are covered.
9. Reinstall the fan assemblies and tighten the seven screws on each media gateway. Tighten
all knurled screws securely so that the screws cannot be loosened without the use of a tool.
Figure 13: G650 TDM/LAN cable installation (part 1)
44 Installing the Avaya G650 Media Gateway
A
h3dptdm1 LAO 111505