Mounting One G650 Media Gateway - Avaya G650 Installing

Installing and cabling the G650 Media Gateway
Figure 4: Setting the carrier address ID on the G650 Media Gateway

Mounting one G650 Media Gateway

Note:
In a multiple G650 Media Gateway configuration, put the G650s in the rack with
Note:
no vertical space between them. If the G650 Media Gateways are not mounted
adjacent to one another with the fronts in the same vertical plane, you cannot use
the TDM/LAN cables to cannot connect them.
Note:
Avaya recommends that you install the first G650 Media Gateway in the lowest
Note:
position as carrier A. This position facilitates mounting carriers B through E
directly above carrier A. For more information, see
Gateway stack (A through E) that is installed next to the media server rack
page 19.
To mount one G650 Media Gateway:
1. To remove the G650 Media Gateway door:
a. Open the door.
b. Lift the door straight up and off the hinge pins.
!
WARNING:
When you handle circuit packs or any components of the G650 Media Gateway,
WARNING:
always wear an authorized wrist ground strap. Ensure that the strap connects to
the ground connector that the G650 provides. Always store the circuit packs to
protect the circuit packs from damage by electrostatic discharge.
22 Installing the Avaya G650 Media Gateway
E
D
C
B
A
-48 VDC
-48 VDC RETURN
E
D
C
B
A
swdlpdle LAO 072403
Figure 2: G650 Media
on