Avaya G650 Installing page 50

Installing and cabling the G650 Media Gateway
Table 3: Circuit pack placement in the G650 Media Gateway (continued)
Circuit pack name
TN791 Analog line 16
port
Port circuit packs
Trunk circuit packs
Figure 18: Front view of a G650 Media Gateway
Figure notes:
1. ESD ground jack
2. 655A power supply
3. TN2312BP IP server interface
circuit pack (in carrier A or B only)
2. Install the TN2312BP IPSI adapter
page 51) on the connector panel in slot 1 for carrier A. If you are using duplicated IPSIs,
connect another IPSI adapter in position 1 for carrier B. Connect the CAT 5 Ethernet cable
to the adapter to connect the G650 Media Gateway to the Ethernet. If you want to use the
external alarm function, attach an external alarm cable to the IPSI adapter.
50 Installing the Avaya G650 Media Gateway
Required or
optional
Optional
—
—
3 4
1
Power 1 2 3 4 5 6
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
(Figure 19: G650 Media Gateway IPSI adapter
Slot Notes
number
Any slot —
Slots on the Recommended
left
Slots on the Recommended
right
5
7 8 9 10 11 12 13 14
scdlff02 LAO 081203
4. TN799DP C-LAN
5. TN2302 IP Media Processor
Power
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
on
2 of 2