Required Input Current; Testing The Ac Outlet - Avaya G650 Installing

Required input current

Table 1: G650 Media Gateway worst-case current levels
current levels for a fully loaded G650 Media Gateway. Each empty slot reduces the required
input current by 1/4 A.
Table 1: G650 Media Gateway worst-case current levels
Input volts AC
90
100
120
230
255
265
The AC power source for each power supply installed in the G650 Media Gateway can be
either:
1 phase of 120 VAC with neutral (100 VAC for Japan) with 15-amp circuit breaker
●
1 phase of 220 or 240 VAC (200 VAC for Japan) with 10-amp circuit breaker.
●

Testing the AC outlet

!
WARNING:
The following recommended test equipment, tests, and diagrams are intended
WARNING:
only for North American installations at 110 VAC to 125 VAC. For installations in
other regions, have a licensed electrician verify the ground and voltages.
!
WARNING:
If the AC outlet tests indicate that the power requirements are not met, advise the
WARNING:
customer to contact a licensed electrician. Do not install the system until all
requirements are met.
Required Amps AC
7.2
6.4
5.4
2.8
2.5
2.4
Installing the G650 Media Gateway
on page 33 shows the worst-case
Input volts DC
40
42
48
54
60
Issue 2 February 2007
Required Amps DC
16.7
15.9
13.9
12.4
11.1
33