Tn2602Ap Ip Media Resource 320 - Avaya G650 Installing

Connecting to the customer's network
Note:
The P board suffix designation means the circuit pack is firmware-downloadable.
Note:
For the download procedures, see the information at
http://www.avaya.com/support/. Click Online Services > Downloard Software.
For more information, see the Hardware Description and Reference for Avaya Communication
Manager (555-245-207).
For information on installing a TN2302AP IP Media Processor circuit pack, see "TN2302AP IP
Media Processor" in Adding New Hardware for Avaya Media Servers and Gateways
(03-300684).

TN2602AP IP Media Resource 320

The TN2602AP IP Media Resource 320 provides high-capacity voice over Internet protocol
(VoIP) audio access to the switch for local stations and outside trunks. The IP Media Resource
320 provides audio processing for the following types of calls:
TDM-to-IP and IP-to-TDM
●
IP-to-IP
●
You can install up to two TN2602AP circuit packs in a single port network for load balancing.
The TN2602AP circuit pack is also compatible with and can share load balancing with the
TN2302 IP Media Processor circuit pack. Actual capacity can be affected by a variety of factors,
including the codec used for a call and fax support.
Two TN2602AP circuit packs may be installed in a single port network (PN) for bearer
duplication. In this configuration, one TN2602AP is an active IP media processor and one is a
standby IP media processor. If the active media processor fails, active connections failover to
the standby media processor and remain active. This duplication prevents active calls in
progress from being dropped in case of failure. The interchange between duplicated circuit
packs affects only the PN in which the circuit packs reside.
For information on installing a TN2602 IP Media Resource circuit pack, see "TN2602 IP Media
Resource 320" in Adding New Hardware for Avaya Media Servers and Gateways (03-300684).
54 Installing the Avaya G650 Media Gateway