Avaya G650 Installing page 26

Installing and cabling the G650 Media Gateway
7. Install and tighten the remaining screws
the first mounting screws
Note:
Follow the same steps to install the G650 Media Gateway with mounting bracket
Note:
in the middle position
8. Set the ringer selection switch on each 655A power supply. For the position of the ringer
switch, see
You can set the switch for:
20 Hz—North American
●
25 Hz—European and international
●
Off—No ringing output. Used this setting when an external ring generator, such as the
●
TN2202 French ringing circuit pack, is provided.
Figure 7: Fuse and ringer switch on the 655A power supply
Figure notes:
1. Fuse
26 Installing the Avaya G650 Media Gateway
on page 24).
(Figure 6: Mounting the media gateway
Figure 7: Fuse and ringer switch on the 655A power supply
1
2
(Figure 5: Placement of the holes on the rack and
2. Ringer switch
on page 25).
on page 26.
evdlrssw LAO 081403