Saving The Current Configuration To File; Encrypting Password Display - Avaya Advanced Gateway 2330 Manual

Basic CLI operations
2. Enter the old password.
3. Enter the new password.
4. Reenter the new password.

Saving the current configuration to file

Save the current configuration to a .cfg file on the flash. Save your configuration to flash each
time you make configuration changes to allow the system to boot from the latest configuration
upon subsequent reboot. You can also save the configuration to a network location using
TFTP, providing a backup of your configuration, or to copy the configuration to another
gateway.
Procedure steps
To save the current configuration file, enter:
save {local <filename> | network <IP address> <file path>}

Encrypting password display

Encrypt the user passwords to ensure that no one can view them in plain text when they are
displayed on screen, or viewed in the configuration file. Use the no form of the command to
display passwords in plain text.
Procedure steps
1. To enter the configuration mode, enter:
24 Using the Command Line Interface
password
The system prompts you to enter the old password:
old password:
The system prompts you to enter the new password:
new password:
The system prompts you to reenter the new password:
re-enter password:
The system confirms the password change:
password has been changed
Comments? infodev@avaya.com
August 2013