Admin Config
The [System]
[Admin Config] submenu is used to set up the authentication server for
logging into the GPLIMT/GPLIM and for changing the Web Time-out configuration. The
choices for authentication server are Local, Radius or Taccas+ . Check the box of the
authentication method desired and then click the OK button to save the change. Once the
setting is applied then the selected authentication method configuration window will be
displayed.
Local
The local password is the Admin password that is used to access the GPLIMT/GPLIM switch
using Telnet, SSH, FTP, and Web Management. Enter the new password and then click the OK
button to save the change.
Radius
If a Radius server will be used then select the Radius box. Then enter the information for the
Radius authentication server. Up to 5 lists can be entered.
59