Layer2 - Samsung OfficeServ 7400 GPLIMT User Manual

Layer2

The Layer 2 Menu is used to configure the Spanning Tree Protocol, GVRP, IGMP, and port
based authentication. Once the [Layer2] menu is selected the submenus will be displayed in
the upper left side of the window as follows:
Layer 2 Menu Description
Menu
RSTP
Port Aggregation
GVRP
IGMP Snooping
Authentication
Submenu
Configuration Used to set the bridge and port environment used in
RSTP.
Status Used to display the RSTP operation status of the
switch.
- Used to set Port Aggregation related values
Configuration Used to set up the GVRP and Dynamic VLAN
Creation services.
Status Used to display the status of each port where GVRP
is set.
Time Interval Used to set the time interval for IGMP Snooping.
Function Used to set the function related with IGMP Snooping.
Forwarding Table Used to display the information for the members
registered in IGMP Group.
Management Used to set whether to operate IGMP Snooping.
Configuration Used to set the Authentication service.
Management Used to start or stop the Authentication service.
32
Description