Table of Contents
Advertisement
Configuration
Select the [PoE]
each port.
PoE Configuration Parameter Description
Parameter
Port
Enable
Limit(mW)
Priority
Select the target port and then set the four port parameters. Click the OK button to save the
changes. The applied changes can be checked by viewing the PoE Port List.
[Configuration] submenu to retrieve and set the power information for
Used to indicate the Ethernet port 1~12 being configured.
Used to sets or release the PoE power supply of the target
port.
If the Power Management Mode is set to Static then the
power limit of each port. Up to 1000~18900 mW can be set.
Used to set the priority setting of the power. When the
power is supplied excessively, the power supply for the port
is blocked according to the priority.
52
Description
Advertisement
Table of Contents
