Table of Contents
Advertisement
Configuration
Use the [Layer2]
authentication method on a per port basis. If the authentication service has not been started the
following window will appear:
Once the service is started using the [Layer2]
submenu the following window will appear when using the [Layer2]
[Configuration] submenu
Authentication Configuration Parameter Description
Parameter
Control
Reauth
Reauth-Period
[Authentication]
[Configuration] submenu to configure the
Description
Used to set the authentication mode of each port when
employing the (802.1x) authentication
- None: Authentication is not performed for the port.
- Force-authorized: Admits the port forcibly.
- Force-unauthorized: Blocks the port forcibly.
- Auto: Allows the port through authentication from the
Radius server and blocks the port.
Used to set the port for re-authentication.
Used to set the timer for the re-authentication cycle when the
Reauth box is checked.
(1-4294967295sec) default: 3600 sec
46
[Authentication]
[Management]
[Authentication]
Advertisement
Table of Contents
