Table of Contents
Advertisement
Member Configuration Parameter Description
Parameter
Group
'S' represents a static trunk, and 'L' represents a LACP (Link
Aggregation Control Protocol) trunk. Up to eight groups can be
used and up to four ports can be included in one group as
members. In addition, a member included in one group cannot be
included another group simultaneously.
Mode
Used to set the mode when LACP is the Group type. Select
either 'Active' or 'Passive'. When a port is set as Active, an
LACP packet is transferred to the opposite switch first. When set
as Passive it responds only when receiving a packet from the
opposite switch.
If the user system and opposite system are both set up as Active,
then the system that has higher priority is used as a reference.
Priority
Used to setsup the port priority. The default is 32768.
Sync
This field indicates information connected to the opposite system
in ports that are configured with LACP ports. If configured as a
LACP member but the LACP connection is abnormal for the
opposite system, it is displayed as 'X'. 'O' means that a port is
properly operated as a LACP port.
Description
38
Advertisement
Table of Contents
