Authentication
The [Authentication] submenu is used to enable or disable remote authentication, to review
existing authentication information, and to configure individual ports and their authentication
methods.
Management
Use the [Layer2]
[Authentication]
[Management] submenu to turn authentication on
or off and to define the Radius server management items.
Click the Run button to start the service and click the Stop button to cease the authentication
service.
If there is the Radius server performing the 802.1x user authentication then the relevant data
must be input here. The host IP address, host, and key should be registered. The default port of
the Radius Host Port is 1812 port. Click the OK button to save any changes.
45