Samsung OfficeServ 7400 GPLIMT User Manual page 55

Log
Select the [PoE]
PoE Log Parameter Description
Parameter
PoE Log
Version
Status
Global
Port
Time interval
If the PoE Log is not enabled then the following items are not activated.
Change the items and then click the OK button to save.
When Protecting Overload Caused by PoE Log Activation
When all items are set to On or Enable, system overload may occur. Use the setting
only when logs are left. If not, set to Disable.
[Log] submenu to set the PoE log report attributes.
- Enable: Enables PoE Log Manager.
- Disable: Disables PoE Log Manager.
Used to set the Version information to On in the PoE Global
menu.
Used to set this value to On when PoE System masks information
and PoE fault occur.
Used to set the power supplies information to On in the PoE
Global menu.
Used to set the power status and port status of the port to On.
Used to set the time for displaying logs regularly.
55
Description