Port Configuration Parameter Description
Parameter
Port
Used to display the port number
Active
Used to set whether to use a port or not.
Negotiation
- Auto: Adjusts the speed through a negotiation with the counterpart.
- Force: Sets the speed without a negotiation with the counterpart.
Set the negotiation item as 'Force' If setting the Duplex item as
'Full'.
Speed/Dpx
Used only if the Negotiation parameter is set to "Force"
- Speed: Ports 1-12 can be set to 10/100 Mbps. Ports 13-14 are
10/100/1000 Mbps.
- Duplex(Dpx): Select Set Full(two-way service) or Half(one-way
service).
Flow Ctl
Used to set whether to use the flow control function. The flow control
is processed according to the value set at Rate (%) In/Out (Entry
rate/Exit rate).
Rate(%)
Used to control the flow by setting the entry rate and exit rate. The
In/Out
unit is the Rate (%) of the port speed. If the flow control function is
not used then the value is set as '0'.
Security
Used to set a switch port to be secure. If a Static MAC address is to
be entered for a specific switch port ([Port]
Address] submenu) then the 'Security' box must be checked. That
ensures that the port is secured for that specific MAC address only.
Priority
Used to set the port value as 'Low', 'High', or Off. This parameter
works in conjunction with [Port]
Description
[MAC]
[QoS] submenu.
20
[Static