Table of Contents
Advertisement
When the administrator sets the Power Management Mode the power supply type is selected
depending on the Power Device (PD) terminal power.
Use the 'Dynamic' setting to make the maximum power of 18.9 W available for each port. Use
the 'Static' setting to make the restriction of power definable. Use the 'Class' setting to decide
upon the restriction of the PoE power depending on the PD terminal PD Classes which are are
described as follows:
PoE Power Management Class Power Description
Class
0
1
2
3
4
PoE System Masks decides the disconnection method of the power and whether to execute
Capacitor Detection.
PoE System Mask Parameter Description
Parameter
Power Disconnect Method
Capacitor Detection
Make the appropriate changes and then click the OK button to apply the settings.
Power
15.4 W
4 W
7 W
15.4 W
15.4 W
Description
- Low port shut down: If the power of the next port
supplied after exceeding the power budget, the low
priority port is shut down for the port with high
priority.
- Access deny: Denied if the power of the next port
supplied after exceeding the power budget.
- Enable: Capacitor enable
- Disable: Capacitor disable
51
Advertisement
Table of Contents
