Table of Contents
Advertisement
Parameter
Source Address
Packet Size
Retry Count
Time to Live
MTU Discovery Hint
Selects the Path MTU
Discovery method
Enter the destination IP (and any exdeted ping parameters if needed) then click the Run button.
Only one destination IP can be tested at a time and the radio button of the IP Address to be
tested must be checked. The radio button of the destination IP Address on the top of the list is
set by default.
Description
Used to set the IP address of the interface for the Ping
test
Used to set the packet size to be transmitted
Used to set the retry count. If it set to '0', there is no
retry. Max is 3
Used to set the TTL value.
None:
Do: Uses PMTU but does not treat. In short, packet
fragmentation does not occur
Don't: Does not use PMTU at all. Since it does not set
the DF field, the fragmentation may occur in remote site
Want: Uses PMTU and treats appropriately. In short, if
the packet size is longer than MTU, the packet
fragmentation occurs
66
Advertisement
Table of Contents
