Configuring the
Operating Modes of
the Stack
Deleting Entries from the Switch Database
The Switch Database page allows you to delete entries from the Switch
Database.
To delete an entry:
1 In the Enter MAC Address field, enter the MAC (Ethernet) address for
the entry.
2 From the Select Action Type drop-down listbox, select Delete.
3 Click the Apply button.
The Display Database Entries table is not automatically updated with
the deletion. To update the table:
a From the Select Action Type drop-down listbox, select Display All.
b Click the Apply button.
You can configure the operating modes of the stack using the
Advanced Stack Setup page.
To access the page:
1 Click the Configuration icon on the side-bar.
2 Click the Stack Setup hotlink. The Advanced Stack Setup page is
displayed as shown in Figure 4-17.
The Advanced Stack Setup page
Figure 4-17
Configuring the Stack
4-29