Displaying Summary Information About The Switch Units In The Stack - IBM 8271 Nways F12 User Manual

5-14 C 5: W
HAPTER ORKING
Displaying Summary
Information About
the Switch Units in
the Stack
W C L
ITH THE OMMAND INE
Time Since Reset
Displays the time that has elapsed since the unit was last reset,
initialised or powered-up.
Operational Version
Displays the version number of the management software currently
installed on the unit. For information about how to upgrade the
management software, see "Upgrading the Management Software of
the Stack" on page 5-18.
Boot Version
Displays the version of Boot PROM software installed on the unit.
Hardware Version
Displays the version number of the unit hardware.
Serial Number
Displays the serial number of the unit.
You can display summary information about the Switch units in the
stack using the inventory command on the System menu.
To display the information:
From the top-level menu, enter:
system inventory
The summary information is displayed.
An example of the summary information is shown below:
Position Description
1 Switch Model E12
2 Switch Model E24
3 Switch Model F12
4 Switch Model F24
The summary information contains the following read-only fields:
Position
This field displays the number of the unit in the stack.
I
NTERFACE
Name
Accounts
Development
Accounts
Accounts
State
Operational
Operational
Loading
Operational