2-10
C
2: I
HAPTER
NSTALLING THE
Assigning IP
Information
S
WITCH
Before using the Switch on your network, we recommend that you assign
IP information to the Switch. If you do this, you can manage the Switch
over the network.
If you have multiple units connected in a stack, you only need to assign
IP information to one unit in the stack. This IP information is then used
to manage the whole stack.
For more information about IP, see "Managing the Stack Over the
Network" on page 3-7. For details about assigning IP information to
the Switch using the web interface, see "Over the Network"on
page 3-4. For details about assigning IP information to the Switch using
the command line interface, see "Over the Network"on page 3-7.