Installing The Serial Web Utility; Using The Serial Web Utility - IBM 8271 Nways F12 User Manual

B
Introduction
Installing the Serial
Web Utility
U
SING THE
If you are using a management workstation running Microsoft
Windows 95 and you want to access the web interface through the
console port of a Switch, you must use the Serial Web Utility (SLIP driver)
included on the CD-ROM supplied with the Switch. You can find it in the
directory:
\Win95\Drivers\Slip\
Every time you want to access the Web interface, use the Serial Web
Utility to set up the connection to the Web interface; it launches your
Web browser and accesses the Web interface for you using the Serial
Line Interface Protocol (SLIP).
If you have any problems accessing the Web interface using the Serial
Web Utility, see "Solving Problems With the Serial Web Utility" on
page 8-7.
The Serial Web Utility can be installed on to a management
workstation that already has management applications installed on it.
By default, the Serial Web Utility is installed in the following directory:
C:\Program Files\IBM\IBM Serial Web
This can be changed during the installation if required.
To install the Serial Web Utility:
1 Start Windows 95.
If you already have an existing management application running,
ensure that it is closed down.
2 Insert the CD-ROM into your CD-ROM drive.
S W
ERIAL
U
EB TILITY