Setting Up IP
Information for the
Switch
Software Version
Displays the version number of the management software currently
installed on the Switch. For information about how to upgrade the
management software, see "Upgrading the Management Software of
the Stack" on page 4-35.
Boot PROM Version
Displays the version of Boot PROM software installed on the Switch.
Unit Uptime
Displays the time that has elapsed since the Switch was last reset,
initialized or powered-up.
You can set up the IP information for the Switch using the IP Setup
page.
To access the page:
1 Click the Unit icon on the side-bar. The Unit Status page is displayed.
2 Click the IP Setup hotlink on the Unit Status page. The IP Setup page is
displayed as shown in Figure 4-8.
Figure 4-8
The IP Setup page
Configuring the Current Switch
4-15