A Quick Guide To The Commands - IBM 8271 Nways F12 User Manual

5-6 C 5: W
HAPTER ORKING
A Quick Guide to
the Commands
W C L
ITH THE OMMAND INE
Table 5-1 describes the commands that are available in the command
line interface.
Command line interface commands
Table 5-1
Command
logout
(ethernet) portstate
(ethernet) summary
(ip/interface) bootp
(ip/interface) define
(ip/interface) display
(ip) ping
(system) display
(system) initialise
(system) inventory
(system) logout
(system) password
(system) remoteAccess
(system) reset
(system) softwareUpgrade Allows you to upgrade the management
(system) unit
I
NTERFACE
What does it do?
Exits the current user from the command line
interface.
Enables and disables Ethernet ports on the
current Switch unit in the stack.
Displays information about the ports on the
current Switch unit in the stack.
Enables and disables BOOTP for the current
Switch in the stack.
Specifies the IP information for the current
Switch in the stack.
Displays the IP information for the current
Switch in the stack.
Allows you to PING other devices on your
network.
Displays configuration information for the
current Switch unit in the stack.
Initialises the Switch units in the stack.
Displays a list of the units in the stack.
Returns the focus of the command line
interface to the previous Switch unit in the
stack.
Specifies the password for the current user.
Enables and disables all forms of remote
access to the stack.
Resets the Switch units in the stack.
software of the Switch units in the stack.
Moves the focus of the command line
interface from one Switch unit in the stack to
another.