IBM 8271 Nways F12 User Manual page 180

C-2 A C: M
PPENDIX ANAGEMENT
S U
OFTWARE PGRADE
5 Enter the upgrade command:
update nwsxx_yy.bin
Where xx_yy is the version of management software. The version of
management software on the CD-ROM is the one that is originally
installed on the Switch. Display the contents of the CD-ROM to see the
filename for this version of management software.
You can also use the following parameter with the upgrade command
to specify the serial (COM) port to use for the PC (COM 1) or (COM 2).
The default for this is COM 1:
or
-c 1 -c 2
An example of the upgrade command with this parameter is:
update -c 1 nwsxx_yy.bin
6 Power-down the Switch.
7 At your PC, press [Return].
8 Power-up the Switch immediately (within 5 seconds).
The utility transfers the management software to the Switch.
9 Repeat all of the steps for any other Switches that need upgrading.
U
TILITY