Chapter 2. Configuration Menu (Root/Config); Saving The Current System Configuration (Root/Config/Save); Setting The Switch To Factory Defaults (Root/Config/Default); Configuration Menu Commands - IBM TotalStorage L10 Cli Reference Manual

Chapter 2. Configuration menu (root/config)

The Configuration menu provides menus and commands for configuring the switch,
ports, One-Step Zoning, Automatic Trunking, Load Balancing, and network settings.
Menu Commands
Table 3. Configuration menu commands
Command
1. save
2. sys
3. default
4. port
5. password
6. load
7. trunk
8. network
9. zone
10. ..
11. ?

Saving the current system configuration (root/config/save)

Switch configuration settings (for example, zoning or port settings) can be saved to the
switch's Flash memory to protect against loss of power. This command automatically
resets the switch.
To save the current configuration:
1. From the Configuration menu (root/config), type save and press E
2. Type y and press E

Setting the switch to factory defaults (root/config/default)

This command returns the switch to the factory default settings; however, the network
configuration and port type settings are retained.
To restore the factory default configuration:
1. From the Configuration menu (root/config), type default and press E
2. Type y and press E
© Copyright IBM Corp. 2004
Description
Saves the current system configuration.
Displays the System Configuration sub-menu.
Resets the switch to the factory default settings.
Displays the Port Configuration sub-menu.
Changes the switch password.
Displays the Load Balancing Configuration sub-menu. See page 33.
Displays the Trunking Configuration sub-menu.
Displays the Network Configuration sub-menu.
Displays the Zone Configuration sub-menu.
Returns to the previous menu.
Displays additional information on a command.
the current switch configuration settings.
A message prompt appears confirming the request.
NTER
The current switch configuration is saved and the switch automatically resets.
A message prompt appears confirming the request.
NTER
to proceed.
.
Additional
Information
See page 9.
See page 11.
See page 9.
See page 20.
See page 10.
See page 37.
See page 39.
See page 41.
See page 10.
See page 10.
to save all of
NTER
.
NTER
9