To change Sheet Constant:
input value by using:
1.7.4 Input Temperature and Atmospheric Pressure
The default atmospheric correction mode is "Automatic" .
Before manual input, change the default mode to "ATM INPUT" :
+
To Input Temperature
input value by using:
To Input Atmospheric Pressure:
input value by using:
1.7.5 Laser Pointer
To activate Laser Pointer :
To quit Laser Pointer
NOTE: The laser pointer is kept activated until it is deactivated by
the above procedure.
1.7.6 Adjusting Laser Plummet brightness
1.7.7 Adjusting LCD contrast
+
,
x2
:
,
,
:
or
or
6
,
,
,
x2
,
,
x3
,
,
RED MARK
RED MARK
x2
x2
x2
x2