Setting Of The Calender And Data (Data Model Only) - Pentax Visio R-400VDN Series Quick Reference Manual

2.4 Setting of the calender and data (Data model only)

1. Turn the power on while pushing F3 key at the same time.
+
2. Release the finger from the power supply button first.
3. Then, release the fingers from F3 key.
4. Select [1. DATE] by using F3 or F4 key, then press F5 key (SELECT)
,
5. Move the cursor by using F1 and F2 key, and input time with
the ten key, then push ENT key.
,
6. Select [2. TIME] by using F3 key or F key,
then press F5 key (SELECT)
,
7. Move the cursor by using F1 and F2 key,
and input date with ten key, then press ENT key.
,
8. Select [3. DAY] by using F3 or F4 key, then press ENT key.
,
9. Select day by using F3 or F4 key, then press ENT key.
,
10. Turn the power off.
,
,
8