Calculation Parameters And Output - Pentax Visio R-400VDN Series Quick Reference Manual

1 Inverse SP (Start Point)
EP (End Point)
2 Point CO (Known point coordinate)
Coordinate DI (Distance to the unknown point)
BE (Direction Angle to the unknown point)
3 Circle Radius Coordinates of three points (P1, P2, P3)
4 Line-Arc SP (Start point of the line)
Intersection EP (End point of the line)
CP (Center point of the circle)
R (Radius of the circle)
Line-Line
5 S1 (Start point of the 1st line)
Intersection E1 (End point of the 1st line)
S2 (Start point of the 2nd line)
E2 (End point of the 2nd line)
Arc-Arc
6 C1 (Center Point of the 1st circle)
Intersection R1 (Radius of the 1st circle)
C2 (Center Point of the 2nd circle)
R2 (Radius of the 2nd circle)
7 Distance SP (Start point of the line)
Offset EP (End point of the line)
OP (Offset Point)
8 Point Distance SP (Start point of the line)
Offset EP (End point of the line)
DI (Distance on the line from SP)
OD (Offset distance from the line)
9 ARC Distance SP (Start Point of the arc)
Offset EP (End point of the arc)
R (Radius of the arc)
DI (Distance on the arc from SP)
OD (Offset distance from the arc)
39
Direction Angle (SP->EP)
H,V, S Distance
Coordinate of the
unknown point
Coordinate of centerpoint
of the arc,Radius of the arc
Coordinates of intersect
points (P1, P2)
Coordinate of the
intersect point
Coordinates of intersect
points (P1, P2)
Coordinate of the
intersect point of the line
and a perpendicular line
from the offset point.
Distance of the intersect
point from the SP of the
line
Coordinate of the offset
point
Coordinate of the offset
point