Rem (Remote Element Measurement) - Pentax Visio R-400VDN Series Quick Reference Manual

To return to the calculation menu screen:
RESULT SCREEN
NOTE: This function calculates the contour, the 2D and 3D surface
area, and the volumes (positive, negative and total.)
The order of point selection is not important. The number
of points must be less than 350. The 3D polygon is
automatically defined by the element triangles that are
formed by connecting neighboring points. The positive
and negative volumes are calculated based on the reference
height.

15. REM (Remote Element Measurement)

To start REM:
POWER TOPO LITE
MAIN MENU
Measure the Reference point:
EDIT
input prism (or reference) height
F3
Measure the elevation of the remote point:
ENT
aim the point to be measured
To return to Calculation menu:
ESC
x2
ESC
x2
CALCULATION
MENU SCREEN
PAGE CALC
F5 F2
CALCULATION
MENU SCREEN
ENT
x3
F4
ENT
REM VALUE IS
DISPLAYED AT THE
BOTTOM OF THE SCREEN
41
MEAS
F1