Hardware Configuration; Configuring A Module - Delta AH500 Hardware Operation Manual

C h a p t e r 6 W r i t i n g a P r o g r a m

6.4 Hardware Configuration

After users double-click HWCONFIG in the project management area, the HWCONFIG window will appear.

6.4.1 Configuring a Module

In the HWCONFIG window, there is an eight-slot backplane on which a CPU module and a power supply
module are installed. However, the backplane used in this example is the four-slot backplane AHBP04M1-5A
on which the digital I/O module AH16AP11R-5A is installed.
If users want to replace the backplane, they can right-click the left side of the rack in the system configuration
area, click Replace on the context menu, and double-click AHBP04M1-5A in the Rack Selection window.
6 - 5