Installing A Wiring Module - Delta AH500 Hardware Operation Manual

4.3.6

Installing a Wiring Module


Installation
1.
One side of a wiring module has to be fixed first.
2.
Press the driver board in the direction indicated by arrow 1, and make sure that the groove is
combined with the DIN rail.

Removal
1. Push the wiring module in the direction indicated by arrow 1.
2. Pull the wiring module in the direction indicated by arrow 2.
C h a p t e r 4 I n s t a l l i n g H a r d wa r e a n d W i r i n g
4 - 1 7