Recommended Maintenance Schedule(S) - Toro Z Master Professional 7000 Series Operator's Manual

•
Carefully release pressure from components with
stored energy.
•
Keep hands and feet away from moving parts.
If possible, Do Not make adjustments with the
engine running. If the maintenance or adjustment
procedure require the engine to be running and
components moving, use extreme caution.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 25 hours
After the first 50 hours
After the first 100 hours
Before each use or daily
Every 25 hours
Every 40 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Maintenance Procedure
• Check the engine-coolant level.
• Check the hydraulic fluid.
• Change the hydraulic filter.
• Replace the engine oil.
• Change the engine-oil filter.
• Change the engine oil.
• Check the wheel lug-nut torque.
• Check the wheel hub castle nut.
• Change the gearbox oil.
• Check the safety-interlock system.
• Check the engine-oil level.
• Check the seat belt.
• Check the engine-coolant level.
• Clean the engine-oil cooler.
• Inspect the blades.
• Clean the mower deck.
• Grease the mower deck and spindles.
• Grease the mower belt idler arm.
• Grease the pump belt idler arm.
• Grease the PTO-drive belt idler arm.
• Grease the brake lever.
• Check the hydraulic fluid.
• Drain the water separator.
• Check the tire pressure.
• Check the PTO-drive belt.
• Check the pump-drive belt.
• Check the alternator belt.
• Lubricate the deck-lift pivots.
• Replace the engine oil.
• Change the engine oil.
• Check the gearbox-oil level.
• Check the engine cooling system hoses.
• Inspect the belts for cracks and wear.
• Check the alternator-belt tension.
• Add light oil or spray lubrication to the machine; refer to lubrication.
• Change the engine-oil filter.
• Grease the brake pivot.
WARNING
Contact with moving parts or hot surfaces
may cause personal injury.
Keep your fingers, hands, and clothing
clear of rotating components and hot
surfaces.
•
Check all bolts frequently to maintain proper
tightness.
39