Toro Z Master Professional 7000 Series Operator's Manual page 13

1. Cutting/dismemberment
hazard, fan and
entanglement hazard,
belt.
Rear Discharge Machines Only
1. Read the Operator's
Manual.
2. Read the Operator's
Manual before performing
maintenance.
1. Warning—stay away from moving parts; keep all guards
and shields in place.
1. Read the Operator's Manual.
110-3853
2. Remove the key from
the key switch and read
the instructions before
servicing or performing
maintenance.
112-3858
3. Remove the key before
adjusting the height of cut.
4. Height-of-cut settings
112-9028
114-9600
decal110-3853
1. Hydraulic fluid level
2. Read the Operator's
Manual.
decal112-3858
1. Hour meter
2. Power take-off (PTO)
3. Parking brake
decal112-9028
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 75 to 81 N∙m (55 to 60 ft-lb).
decal114-9600
11
115-4212
3. Warning—do not touch the
hot surface.
116–5610
4. Neutral
5. Operator presence switch
6. Battery
116-8283
decal115-4212
decal116-5610
decal116-8283