Avaya S8500 Replacing page 7

Figure 4: Inserting the network interface card
indsbnic KLC 101404
!
CAUTION:
Be sure that the NIC is completely and correctly seated in the PCI-2 expansion
CAUTION:
slot of the Avaya S8500B Media Server. Incomplete insertion might cause
damage to the system board or the NIC.
2. Position the faceplate so that it fits in the PCI-2 slot using the captive screw to hold it in
place.
3. Tighten the captive screw.
Installing the new network interface card in the S8500 Media Server
Note:
This procedure is for S8500.
Note:
To install the new NIC into the S8500 media server:
1. Carefully grasp the new NIC by the top edge or upper corners and align it with the PCI-2
expansion slot (see
the NIC firmly into the expansion slot.
Ensure that the NIC is completely and correctly seated in the PCI-2 expansion slot of the
S8500 Media Server. Incomplete insertion might cause damage to the system board or the
NIC .
2. Position the faceplate so that it fits in the PCI-2 slot using the captive screw to hold it in
place.
1
2
Figure 5: Inserting the new network interface card on page 8). Press
555-245-760 Issue 3 January 2005 7