Avaya S8500 Replacing page 12

Replacing the S8500 dual network interface
Figure 7: Ping screen
2. In the Host Name or IP address field, type in the host name or IP address of a computer
on the network.
3. Click Execute Ping.
4. Verify that the ping was successful, indicating that the media server is connected to the
customer's network.
5. If DNS is administered, type in the host name of a computer on the network.
6. Click Execute Ping.
7. Verify that the ping was successful, indicating that DNS is working.
If available, have a customer representative do the following test from a computer on their
network:
1. Click Start > Run to open the Run dialog box.
2. Type command and click OK to open an MS-DOS command window.
3. Type ping serveripaddress and click OK, where serveripaddress is the IP address
of media server.
4. Verify that the ping was successful.
12 Replacing the S8500 dual network interface