BRAKE SYSTEM
REAR CALIPER ASSEMBLY VIEW
REAR CALIPER ASSEMBLY VIEW
REF.
q
w
e
r
t
y
u
i
o
a
s
10.8
DESCRIPTION
Brake Pads
Caliper Mount
Pistons
Boot, Pin Bushing
Square O-Rings (Thin)
Square O-Rings (Thick)
Boot, Pin Seal
Caliper Asm.
Plug Cap Inlet
Set Screw
Bleeder Screw
NOTES
If brake pads are contaminated by oil,
grease, solvent, brake fluid, etc., the brake
pads must be replaced. Cleaning is not
sufficient.
Any time caliper mount is removed, or caliper
is serviced, clean slide pins and re-apply
silicone grease.
When replacing, apply Polaris DOT 4 Brake
Fluid to component.
When replacing, apply Polaris DOT 4 Brake
Fluid to component.
46 in-lbs (5 N·m)
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.