Switches / Controls; Brake Switch; Ignition Key Switch; Ignition Key Switch (International Models) - Polaris Sportsman XP 1000 S 2020 Service Manual

SWITCHES / CONTROLS

BRAKE SWITCH

Applying the brakes closes a switch to activate the brake
lamps. Use a multimeter to test for continuity when the
brakes are applied.
Replace the brake switch if function does not pass test.

IGNITION KEY SWITCH

1. Disconnect the key switch harness by lifting the
connector lock and pulling on the connector. Do not
pull on the wiring.
2. Test between the 3 sets of outputs (OFF / ON /
START). If any of the tests fail, replace ignition switch
assembly.
• Turn the ignition key to ON. There should be continuity
between switch pins B and C.
• Turn the ignition key to START. There should be
continuity between switch pins B and C; A and D.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
PIN
P1
P2
P3
P4
IGNITION KEY SWITCH
(INTERNATIONAL MODELS)
1. Disconnect the key switch harness by lifting the
connector lock and pulling on the connector. Do not
pull on the wiring.
2. Test between the 4 sets of outputs (OFF / ON
LIGHTS / ON / START). If any of the tests fail, replace
ignition switch assembly.
• When the ignition key is OFF, there should be
continuity between switch pins E and F.
• Turn the ignition key to ON LIGHTS. There should be
continuity between switch pins C and D; A, E, and F.
• Turn the ignition key to ON. There should be continuity
between switch pins C and D; E and F.
• Turn the ignition key to START. There should be
continuity between switch pins A and B; C and D; E
and F.
BODY ELECTRICAL
LOCATION
A
B
C
D
12
12.7